If you live in a house with concrete walls, it can be tough to get WiFi signals. Sometimes sitting around the same room as your router isn’t practical and sometimes all that’s needed is just being able to take out laptops or tablets for some fresh air – without worrying about losing connection!
Luckily there are ways we’ve found which will improve any weak wireless reception so even if our homes have solid surfaces between us and outer space there’re still plenty of opportunities available for what should become yours too:
Here are some ways you can try to boost your WiFi signal through walls:
Use a WiFi repeater or extender
When you need to fix a weak WiFi signal in your house, the cheapest way is to use repeaters. These devices take whatever bandwidth from an existing router and amplify it for wider coverage throughout different parts of one’s property given they are connected by wires or cables that reach all corners without any dead zones as many do nowadays.
Due to their design philosophy being more lightweight than ever before. So as not to slow down network speeds too much even though some may still happen but at least there won’t be nearly the same amount since most newer models have been made with fiber optics instead which provide ultimate durability against interference.
Place your router in a central location
The optimal location for your router is usually in a central location within your home. This allows for the best possible signal strength and fastest speeds throughout your home. If you have a large home or one with multiple levels, it might be helpful to place your router on an elevated surface like a table or shelf.
If you’re using a powerful router, placing it high up can also help extend its range. But if you’re using a weaker router, keeping it closer to ground level can actually improve performance.
You should also avoid placing your router near metal objects, fish tanks, microwaves, or cordless phones. These can all interfere with your signal. And if your router is too close to another wireless device, like a baby monitor or wireless security camera, it can also slow down your speeds.
Don’t put your router in a closet
There are a number of reasons why you shouldn’t put your router in a closet. For one, the signal will be weaker and won’t reach as far as it would if it were out in the open. Additionally, any obstacles between your router and your devices will also weaken the signal. If you have to put your router in a closet, make sure it’s not lined with metal, which can further interfere with the signal.
Another reason is that it can overheat. Routers need airflow to function properly, and if they get too hot, they can start to malfunction. So, if you’re worried about your router overheating, it’s best to keep it out in the open where it can get plenty of air.
Use a WiFi analyzer app to find the best channel for your router
It’s like finding a needle in a haystack.
If you’re not familiar with the term, a WiFi analyzer is an app that helps you optimize your home network by finding the best channel for your router.
There are a few different ways to go about this, but the general idea is to use an app to scan for networks and then find the one that has the least amount of interference.
This can be tricky because there are a lot of factors that can interfere with WiFi signals (including other devices in your home that are using WiFi). But if you take some time to experiment, you should be able to find a channel that works well for you.
Here are a few tips:
1. Use a WiFi analyzer app to scan for networks and find the one with the least interference.
2. If you have a lot of devices in your home that uses WiFi, try turning them off or disconnecting them from the network while you’re scanning for a good channel.
3. Once you’ve found a good channel, make sure to change your router’s settings so that it uses that channel exclusively.
4. Keep in mind that interference can vary depending on the time of day and other factors, so it’s a good idea to occasionally scan for a new channel just to be sure.
Change Your Old Router
Time flies and technology changes. The same goes for your old router. Just like how you change the oil in your car every 5,000 miles, it’s a good idea to upgrade your router every few years as well. Not only do new routers offer better speeds, but they also come with updated security features to keep your home network safe from the latest threats.
If you’re using an older router, now is a good time to consider upgrading to a newer model. Here are a few things to look for when choosing a new router:
Wireless AC support: If you have devices that support the 802.11ac wireless standard, you’ll want a router that supports it as well. Wireless AC offers faster speeds and greater range than the older 802.11n standard.
Dual-band: A dual-band router offers both 2.4GHz and 5GHz support. The 5GHz band is typically less crowded than the 2.4GHz band and offers faster speeds. If you have a lot of devices that use the 2.4GHz band, though, a dual-band router will be able to better handle the traffic.
MU-MIMO: This is a newer technology that allows your router to communicate with multiple devices at the same time, instead of taking turns talking to each one. If you have a lot of devices on your network, MU-MIMO can help them all get online faster.
USB ports: Some routers come with USB ports that allow you to connect a printer or external hard drive. This can be handy if you want to share a printer or files across your network.
Guest network: A guest network allows visitors to access your Wi-Fi without seeing the rest of your home network. This is a convenient way to give guests internet access without giving them access to your personal files.
When shopping for a new router, you’ll also want to consider its range and coverage. If you have a large home, you’ll need a router that can cover a distance. And if you have a lot of walls or other obstacles in your home, you’ll need a router that can penetrate them.
Try a mesh WiFi system
A mesh WiFi system consists of the main router that is connected to your modem, and a series of satellite nodes that are placed around your home. The nodes communicate with each other wirelessly and work together to create a single strong WiFi network. This type of system is ideal for larger homes, or homes with thick walls, as it helps to eliminate WiFi dead spots and provides consistent speeds throughout your home.
If you are considering a mesh WiFi system for your home, there are a few things to keep in mind. First, you will need to choose a system that is compatible with your router. Second, you will need to decide where to place the nodes in your home. And finally, you will need to make sure that the system you select can cover the square footage of your home.
Use Ethernet cables
If the wireless connection fails or is not possible, connect the router to the computer using an Ethernet cable.
First, connect one end of an Ethernet cable to the yellow “Internet” port on the back of your router. Then, connect the other end of the cable to the Ethernet port on your computer. Once both ends are plugged in, your computer should be able to connect to the internet. If you’re still having trouble, try restarting your computer and router.
Paint your walls with copper paint
Copper is an excellent choice for boosting your WiFi connection. The metal is a good conductor of heat and electricity which makes it perfect for boosting signals. This DIY project can be done relatively easily at home or even on the cheap by buying premixed formulas from your local hardware store.
Add metal foil to your walls
Adding metal foil to your walls is another DIY way to boost the WiFi signal. Also, This DIY trick is not only effective at blocking out unwanted noise, but it also helps to absorb sound waves. By covering your walls with metal foil, you can significantly reduce the amount of noise that enters your home. The downside to this method is that it can be quite difficult to remove once it’s been applied.
Place a reflector on your wall
In order to boost your home’s wifi, you can place a reflector on your wall. This will help to amplify the signal and give you better coverage. You can purchase a reflector online or at your local electronics store.
So how does it work?
A reflector is simply a device that helps to redirect and amplify the wifi signal. By placing it on your wall, you are essentially creating a barrier between your router and the outside world. This will help to improve the quality of your signal and give you better coverage.
There are a few things to keep in mind when using a reflector:
1. Make sure that the reflector is placed in a central location. This will ensure that it can properly amplify the signal.
2. Avoid placing the reflector near metal objects. This can interfere with the signal and cause it to be weaker.
3. Place the reflector at least two feet away from your router. This will help to prevent interference and ensure that the signal is strong.
4. Make sure that the reflector is placed in an open area. This will help to ensure that it can properly amplify the signal.
Conclusion
We have explained all the possible ways to boost your wifi signal through thick walls. But we recommend you buy a mesh wifi system, it’s the best hassle-free method that has been proven to work flawlessly against thick walls. Also, they are not so costly.